« Go Back

Equipment Archive

Zoom F8 audio recorder setup

Following image shows a scrap piece of 5/8 inch plywood, which was cut with a jigsaw to 12×13 inches. It will serve as a base for my ‘soundboard. This is in the early stages of building the project. Underneath the Zoom F8 audio recorder ...Read More

Work-truck finally hits the road

It has taken many years, to slowly build up a good collection of tools. Most of the gear was in those Dewalt cases, and all these were stored in my motor-home. It didn’t leave much room. My 1994 GMC Safari mini-van was too small ...Read More

Ursa camera + Nikon 1,600 mm lens combo

Mid February-2016,  I purchased a piece of aluminum, from a metal supply shop in Calgary. It was 1 foot wide, 4 feet long and 1/2 inch thick. Weight was over 28 lbs. After a few days of looking and thinking, I finally had a ...Read More

July 2015 update – Equipment cases

In this next shot – there are 16 cases made by DeWalt. They are stackable, strong and air-tight. Purchased the first one at HomeDepot in Calgary – as a test. All the others came from Amazon (prime with free shipping and cheaper). Plus 2 ...Read More

« Go Back